Lexmark MX-B557P User Manual Download Page 152

Page: 152 / 217

Gray background

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Turn off the printer, wait for 10 seconds, and then turn on the
printer.

Decrease toner darkness.

From the control panel, navigate to:

Settings

Print

Quality

Toner Darkness

Print the document.

Does gray background appear on prints?

Go to step 2.

The problem is
solved.

Step 2

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the toner cartridge is not supported, then install a

supported one.

Print the document.

Does gray background appear on prints?

Go to step 3.

The problem is
solved.

Step 3

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Does gray background appear on prints?

Contact your

dealer

. The problem is

solved.

Troubleshooting

152

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands