Lexmark MX-B557P User Manual Download Page 15

Page: 15 / 217

Setting up and using the home screen
applications

Note:

These applications are supported only in some printer models.

Using the home screen

Note:

Your home screen may vary depending on your home screen customization settings, administrative

setup, and active embedded solutions.

Touch

Status/Supplies

•

Show a warning or error message whenever the printer requires intervention to
continue processing.

•

View more information on the printer warning or message, and on how to clear it.

Note:

You can also access this setting by touching the top section of the home

screen.

Job Queue

Show all the current print jobs.

Note:

You can also access this setting by touching the top section of the home

screen.

Change Language Change the language on the display.

Settings

Access the printer menus.

Held Jobs

Show the print jobs that are held in the printer memory.

USB Drive

Print photos and documents from a ﬂash drive.

Address Book

Manage a contact list that other applications on the printer can access.

Setting up and using the home screen applications

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands