Lexmark MX-B557P User Manual Download Page 14

Page: 14 / 217

Panel with touch-screen display

Use the

Display

•

View printer messages and supply status.

•

Set up and operate the printer.

Home button

Go to the home screen.

Numeric keypad

Enter numbers or symbols in an input ﬁeld.

Power button

Turn on or turn off the printer.

Note:

To turn off the printer, press and hold the power button for ﬁve seconds.

Stop or Cancel button

Stop the current printer task.

Indicator light

Check the printer status.

Volume buttons

Adjust the speaker volume.

Headset or speaker port Attach a headset or speaker.

Note:

This feature is available only in some printer units.

Back button

Return to the previous screen.

Understanding the status of the power button and
indicator light

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blue

The printer is ready or processing data.

Red

The printer requires user intervention.

Power button light

Printer status

Off

The printer is off, ready, or processing data.

Solid amber

The printer is in Sleep mode.

Blinking amber

The printer is in Hibernate mode.

Using the control panel

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands