Lexmark MX-B557P User Manual Download Page 12

Page: 12 / 217

When using optional trays:

•

Always use a caster base when the printer is conﬁgured with a 2100

‑

sheet tray.

•

The 2100

‑

sheet tray must always be at the bottom of a conﬁguration.

•

A maximum of four optional trays may be conﬁgured with the printer.

•

The optional 250

‑

and 550

‑

sheet trays may be installed in any order.

Some options may not be available. For more information, contact the place where you purchased the printer.

Attaching cables

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the USB cable, any

wireless network adapter, or the printer in the areas shown while actively printing.

Use the

Power cord socket Connect the printer to an electrical outlet.

USB printer port

Connect the printer to a computer.

Ethernet port

Connect the printer to a network.

USB port

Attach a keyboard or any compatible option.

Note:

This port is available only in some printer models.

Learning about the printer

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands