Ordering parts and supplies
To order parts and supplies, contact the place where you purchased the printer.
Note:
All life estimates for printer supplies assume printing on letter
‑
or A4
‑
size plain paper.
Checking the status of parts and supplies
1
From the control panel, navigate to:
Settings
>
Reports
>
Device
>
Device Statistics
For non
‑
touch
‑
screen printer models, press
to navigate through the settings.
2
From the Supply Information section of the pages printed, check the status of parts and supplies.
Ordering a toner cartridge
Notes:
•
The estimated cartridge yield is based on the ISO/IEC 19752 standard.
•
Extremely low print coverage for extended periods of time may negatively affect actual yield.
To order a toner cartridge, contact the place where you purchased the printer.
Ordering an imaging unit
To order an imaging unit, contact the place where you purchased the printer.
Ordering a maintenance kit
To order a maintenance kit, contact the place where you purchased the printer.
Replacing parts and supplies
Replacing the toner cartridge
1
Open door A.
Warning—Potential Damage:
To prevent damage from electrostatic discharge, touch any exposed metal
frame of the printer before accessing or touching interior areas of the printer.
Maintaining the printer
104
Summary of Contents for MX-B557P
