Lexmark MS71x, Service Manual

Page: 247 / 659

When it is set to Auto , the emulator selected to print the job determines which of the installed input sources will receive
the change prompt. When set to a value other than Auto, the selected source always receives this type of prompt.
Envelope Prompts
This controls which tray a change prompt is directed to when the envelopes are sensed to be the wrong size.
Note: The value of “Action for Prompts” on page 247 may override the value of this setting.
To change this setting:
1
From the Configuration menu, navigate to Envelope Prompts .
2
Select from the available options:
•
Auto (default)
•
Multi
‑
purpose Feeder
• Manual Envelope
3
Depending on the printer model, press OK or touch to save the setting, or press X to return to the Configuration
menu without saving any changes.
When it is set to Auto , the emulator selected to print the job determines which of the installed input sources will receive
the change prompt. When set to a value other than Auto, the selected source always receives this type of prompt.
Action for Prompts
This setting enables a user to determine which input source would receive paper-related or envelope-related change
prompts when they occur. Regardless of the target source, the printer always requires some type of user assistance to
resolve the change prompt (examples: pushing a button to ignore the prompt and changing the source’s installed
media). However, this setting gives a user the option of having the printer resolve change prompt situations without
requiring any user assistance.
To change this setting:
1
From the Configuration menu, navigate to Action for Prompts .
2
Select from the available options to change the setting.
•
Prompt User (default)
•
Continue
•
Use Current
3
Depending on the printer model, press OK or touch to save the setting, or press X to return to the Configuration
menu without saving any changes.
When set to Prompt user , the printer behaves like the past implementation. When a change prompt occurs, the printer
stops printing, posts the change prompt to the target source, and waits for the user to select an action before continuing.
When set to Continue , the printer automatically assumes that the user selects Continue every time a change prompt
is encountered. Likewise, when the device is set to Use Current , all change prompts will perform as if Use Current was
selected by the user.
4063
Service menus
247