Lexmark MS312, Service Manual

Page: 106 / 343

Flash memory full [52]
Try one or more of the following:
•
From the printer control panel, press to clear the message and continue printing.
•
Delete fonts, macros, and other data stored in the flash memory. From the printer control panel, navigate
to:
> Settings > > Print Settings > > Utilities Menu > > Format Flash > > Yes >
•
Use a larger
‑
capacity flash memory card.
Note: Downloaded fonts and macros that are not stored in the flash memory are deleted when the
printer is powered off or restarted.
Flash memory unformatted [53]
Try one or more of the following:
•
From the printer control panel, press to stop the defragmentation and continue printing.
•
Format the flash memory device.
Note: If the error message remains, then the flash memory device may be defective and need to be
replaced.
Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, press on the printer control panel to clear the message
and continue printing.
Imaging unit nearly low [84.xy]
If necessary, press on the printer control panel to clear the message and continue printing.
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section
of the
User’s Guide .
If necessary, press on the printer control panel to clear the message and continue printing.
Insert tray [x]
Insert the indicated tray into the printer.
4514-330
Diagnostics and troubleshooting
106