Lexmark MS312, Service Manual

Page: 103 / 343

Understanding the printer messages
Bin full. Remove paper.
Remove the paper stack from the standard bin.
Cannot collate large document [37]
Try one or more of the following:
•
From the printer control panel, press to print the portion of the job already stored and begin
collating the rest of the print job.
•
Cancel the current print job.
Cannot defrag flash memory [37]
Try one or more of the following:
•
From the printer control panel, press to stop the defragmentation and continue printing.
•
Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate to:
> Settings > > Print Settings > > Utilities Menu > > Format Flash > > Yes >
•
Install additional printer memory.
Cartridge, imaging unit mismatch [41.xy]
1
Check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or
non-MICR supplies.
Note: For a list of supported supplies, see the “Ordering supplies” section of the User's Guide or
visit www.lexmark.com .
2
Change the toner cartridge or imaging unit so that both are MICR or non
‑
MICR supplies.
Notes:
•
Use a MICR toner cartridge and imaging unit for printing checks and other similar documents.
•
Use a non-MICR toner cartridge and imaging unit for regular print jobs.
Cartridge low [88.xy]
You may need to order a toner cartridge. If necessary, press on the printer control panel to clear the
message and continue printing.
4514-330
Diagnostics and troubleshooting
103