Note:
Make sure the paper size is correctly set. For example, if the MP Feeder Size is set to
Universal, then make sure the paper is large enough for the data being printed.
Load [paper source] with [custom type name] [orientation]
‑
On
‑
On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then try
one or more of the following:
•
Load the tray or feeder with the correct size and type of paper.
•
From the printer control panel, press
to continue printing.
Note:
If the printer finds a tray that has the correct size and type of paper, then it feeds from that
tray. If the printer cannot find a tray that has the correct size and type of paper, then it prints from the
default paper source.
•
Press
to cancel the print job.
Troubleshooting
121
