Replace unsupported imaging unit[32.xy]
‑
On
‑
On
‑
On
‑
Blinking
If the light sequence matches the preceding light sequence, then remove the imaging unit and install a
supported one. For more information, see
“Using genuine Lexmark parts and supplies” on page 81
Notes:
•
This error can also be caused by installing a genuine Lexmark imaging unit, such as a MICR unit, that
is not intended to be used in this product.
•
If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the
User’s
Guide
or go to
Non
‑
Lexmark [supply type], see User’s Guide [33.xy]
Note:
The supply type can be toner cartridge or imaging unit.
The printer has detected a non
‑
Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-
party supplies or parts may affect the performance, reliability, or life of the printer and its imaging
components. For more information, see
“Using genuine Lexmark parts and supplies” on page 81
.
All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or associated components.
Troubleshooting
118
