Lexmark MB2236 User Manual Download

Page: 139 / 166

Can receive but not send faxes

Action

Yes

Step 1

Load the original document properly into the ADF tray or on the
scanner glass.

Can you send faxes?

The problem is
solved.

Go to step 2.

Step 2

Set up the shortcut number properly.

•

Check if the shortcut number is set for the telephone number
that you want to dial.

•

Dial the telephone number manually.

Can you send faxes?

The problem is
solved.

Contact

customer

support

Can send but not receive faxes

Action

Yes

Step 1

Make sure that the paper source is not empty.

Can you receive faxes?

The problem is
solved.

Go to step 2.

Step 2

Check the ring count delay settings.

From the control panel, navigate to:

Settings

Fax

Fax Defaults

Analog Fax Setup

Fax

Receive Settings

Rings to Answer

Can you receive faxes?

The problem is
solved.

Go to step 3.

Step 3

If the printer is printing blank pages, then see

“Blank or white

pages” on page 116

Can you receive faxes?

The problem is
solved.

Contact

customer

support

Troubleshoot a problem

139

Summary of Contents for MB2236







































































































































































Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands

Lexmark MB2236, User Manual

Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands