Lexmark MB2236 User Manual Download

Page: 121 / 166

Action

Yes

Step 2

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the paper folded or wrinkled?

Go to step 3.

The problem is
solved.

Step 3

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting from the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Is the paper folded or wrinkled?

Contact

customer

support

The problem is
solved.

Gray background

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Turn off the printer, wait for 10 seconds, and then turn on the
printer.

Decrease toner darkness.

From the control panel, navigate to:

Settings

Print

Quality

Toner Darkness

Print the document.

Does gray background appear on prints?

Go to step 2.

The problem is
solved.

Troubleshoot a problem

121

Summary of Contents for MB2236







































































































































































Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands

Lexmark MB2236, User Manual

Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands