Lexmark MB2236 User Manual Download

Page: 117 / 166

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Check if the printer is using a genuine and supported Lexmark
toner cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Is the printer printing blank or white pages?

Go to step 2.

The problem is
solved.

Step 2

Remove the imaging unit.

Warning—Potential Damage:

Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.

Warning—Potential Damage:

Do not touch the

photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.

Check the imaging unit for signs of damage.

Note:

Make sure that the photoconductor drum contact is not

bent or out of place.

Firmly shake the imaging unit to redistribute the toner.

Insert the imaging unit.

Print the document.

Is the printer printing blank or white pages?

Go to step 3.

The problem is
solved.

Step 3

Replace the imaging unit.

Is the printer printing blank or white pages?

Contact

customer

support

The problem is
solved.

Dark print

Troubleshoot a problem

117

Summary of Contents for MB2236







































































































































































Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands

Lexmark MB2236, User Manual

Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands