Lexmark MB2236 User Manual Download

Page: 110 / 166

Paper frequently jams

Action

Yes

Step 1

Remove the tray.

Check if paper is loaded correctly.

Notes:

•

Make sure that the paper guides are positioned correctly.

•

Make sure that the stack height is below the maximum
paper ﬁll indicator.

•

Make sure to print on recommended paper size and type.

Insert the tray.

Print the document.

Do paper jams occur frequently?

Go to step 2.

The problem is
solved.

Step 2

From the control panel, navigate to:

Paper

Tray Conﬁguration

Paper

Size/Type

Set the correct paper size and type.

Print the document.

Do paper jams occur frequently?

Go to step 3.

The problem is
solved.

Step 3

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Do paper jams occur frequently?

Contact

customer

support

The problem is
solved.

Jammed pages are not reprinted

Action

Yes

From the control panel, navigate to:

Device

Notiﬁcations

Jam Content Recovery

From the Jam Recovery menu, select

Auto

, and then press

Are the jammed pages reprinted?

The problem is
solved.

Contact

customer
support

Troubleshoot a problem

110

Summary of Contents for MB2236







































































































































































Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands

Lexmark MB2236, User Manual

Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands