Lexmark M124x Service Manual Download Page 35

Page: 35 / 318

Print is too dark check

Note:

Before performing this print quality check, go to the control panel home screen and navigate to

Settings

Troubleshooting

Print Quality Test Pages

, and then perform the Initial print quality check.

See

“Initial print quality check” on page 26

Actions

Yes

Step 1

Check if the printer is using a genuine and supported Lexmark
toner cartridge.

Note:

If the printer is using a third

‑

party cartridge, then refer the

users to their cartridge supplier.

Is the printer using a genuine and supported toner cartridge?

Go to step 3.

Go to step 2.

Step 2

Install a genuine and supported toner cartridge.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Turn off the printer, wait for 10 seconds, and then turn on the
printer.

From the control panel, reduce the toner darkness in the
Quality menu.

Note:

8 is the factory default setting.

Does the problem remain?

Go to step 4.

The problem is
solved.

Step 4

From the control panel, set the paper type, texture, and weight in
the Paper menu to match the paper loaded.

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Depending on the operating system, specify the paper type,
texture, and weight from Printing Preferences or Print dialog.

Does the problem remain?

Go to step 6.

The problem is
solved.

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands