Lexmark M1246 User Manual Download

Page: 61 / 152

Menu item

Description

Proﬁles List

Print a list of proﬁles that are stored in the printer.

Print

Menu item

Description

Print Fonts

PCL Fonts

PS Fonts

Print samples and information about the fonts that are available in each printer
language.

Print Directory

Print the resources that are stored in the ﬂash drive or printer hard disk.

Note:

This menu item appears only when a ﬂash drive or printer hard disk is

installed.

Network

Menu item

Description

Network Setup Page

Print a page that shows the conﬁgured network and wireless settings on the
printer.

Note:

This menu item appears only in network printers or printers connected

to print servers.

Help

Menu item

Description

Print All Guides

Prints all the guides

Media Guide

Provides information about loading paper and specialty media

Print Quality Guide

Provides information about solving print quality issues

Mono Quality Guide

Provides information about mono print quality settings

Information Guide

Provides more information sources about the printer

Connection Guide

Provides information about connecting the printer locally (USB) or to a
network

Moving Guide

Provides information about moving, locating, or shipping the printer

Supplies Guide

Provides information about ordering supplies

Understanding the printer menus

Summary of Contents for M1246

























































































































































Search results

Summary of Contents for M1246

Reviews:

Related manuals for M1246

Brands by name

Popular brands

Lexmark M1246, User Manual

Search results

Summary of Contents for M1246

Reviews:

Related manuals for M1246

Brands by name

Popular brands