Lexmark M1100 Series User Manual Download Page 49

Page: 49 / 246

Using the printer control panel

From the printer control panel, navigate to:

Settings

Paper Menu

Custom Types

Select a custom paper type name, and then select a paper type.

Note:

Paper is the factory default paper type for all user

‑

deﬁned custom names.

Press

Printing

Printing a document

Printing from a computer

Note:

For labels, card stock, and envelopes, set the paper size and type in the printer before sending the

print job.

From the document that you are trying to print, open the Print dialog.

If necessary, adjust the settings.

Send the print job.

Adjusting toner darkness

Using the Embedded Web Server

Open a Web browser, and then type the IP address of the printer in the address ﬁeld.

Notes:

•

View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Click

Settings

Print Settings

Quality Menu

Toner Darkness

Adjust the toner darkness, and then click

Submit

Using the printer control panel

From the printer control panel, navigate to:

Settings

Print Settings

Quality Menu

Toner Darkness

Adjust the toner darkness, and then press

Using M1145

Summary of Contents for M1100 Series























































































































































































































































Search results

Summary of Contents for M1100 Series

Reviews:

Related manuals for M1100 Series

Brands by name

Popular brands

Lexmark M1100 Series, User Manual

Search results

Summary of Contents for M1100 Series

Reviews:

Related manuals for M1100 Series

Brands by name

Popular brands