manualshive.com logo in svg

Lexmark Jetprinter 4079-00 series, Service Manual

Share
Download
Lexmark Jetprinter 4079-00 series Service Manual Download Page 15

General Information

 1-4

4079-00X

Operator Panel 

You can access various printing functions and options using the 
printer’s operator panel.

Indicators

There are several indicators in the operator panel that show the sta-
tus of the machine.

Display This 2-line liquid crystal display (LCD) shows the printer’s 
status, menu items and error messages.

For example, a star (*) is displayed when the printheads are capped.

Ready This indicator is on when the printer is on-line and is off when 
the printer is off-line. The Ready indicator is turned off when Start/
Stop is pressed, when there is a check condition such as out-of-
paper, or when Menu has been pressed to display the menu.

Buffer This indicator blinks when data is being received by the 
printer. When the buffer indicator is on solid, it indicates the buffer is 
full or a partial page is stored. Press Print Buffer to print the stored 
page.

Check The Check indicator lights up when the printer requires oper-
ator intervention, such as ink or paper problems. An error message 
will also be displayed, indicating the type of problem.

Summary of Contents for Jetprinter 4079-00 series
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands