Lexmark Interpret S415 Page 127 User Manual Download

Page: 127 / 183

Close Printer

The printer is open. Close the printer to clear the message.

Fax Memory Full

Reduce the resolution or the number of pages of the fax. Touch

or press

, depending on your printer model, to

clear the message.

Note:

This deletes the fax job from the printer memory.

Ink Cartridge Error

The printer is unable to authenticate one or more of the installed ink cartridges. Try one or more of the following:

•

Press

to cancel the current job.

•

Use only genuine Lexmark ink cartridges.

•

Install the specified ink cartridges properly.

•

Turn the printer off, then wait about 10 seconds, and then turn the printer back on.

Note:

Make sure the printer is not in Sleep mode. Press and hold for three seconds to turn off the printer.

•

See the

User's Guide

or visit the Lexmark Support Web site at

http://support.lexmark.com

for more information.

Ink Cartridge Missing

Try one or more of the following:

•

Install the specified missing ink cartridge or cartridges.

•

Reinsert the specified ink cartridge or cartridges.

•

Press

O K

to clear the message.

•

See the

User's Guide

or visit the Lexmark Support Web site at

http://support.lexmark.com

for a list of supported

ink cartridges.

Troubleshooting

127

Summary of Contents for Interpret S415
























































































































































































Search results

Summary of Contents for Interpret S415

Reviews:

Related manuals for Interpret S415

Brands by name

Popular brands

Lexmark Interpret S415, User Manual

Search results

Summary of Contents for Interpret S415

Reviews:

Related manuals for Interpret S415

Brands by name

Popular brands