Lexmark CX725 Series User Manual Download Page 85

Page: 85 / 157

Resetting the maintenance counter

From the home screen, touch

Settings

Device

Maintenance

Conﬁguration Menu

Supply Usage

And Counters

Select

Fuser Reset

ITM Reset

Moving the printer

Moving the printer to another location

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or

more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Make sure that all doors and trays are closed.

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in ﬂooring.

•

If the printer does not have a caster base but is conﬁgured with optional trays, then lift the printer off the
trays. Do not try to lift the printer and the trays at the same time.

•

Always use the handholds on the printer to lift it.

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

Note:

Damage to the printer caused by improper moving is not covered by the printer warranty.

Shipping the printer

For shipping instructions, go to

http://support.lexmark.com

or contact customer support.

Maintaining the printer

Summary of Contents for CX725 Series






























































































































































Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands

Lexmark CX725 Series, User Manual

Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands