Lexmark CX331 User Manual Download Page 20

Page: 20 / 204

Front

508 mm (20 in.)

Note:

The minimum space needed in front of the printer is 76 mm (3 in.).

Left side

76 mm (3 in.)

Attaching cables

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

To reduce the risk of ﬁre, use only a 26 AWG or larger

telecommunications (RJ-11) cord when connecting this product to the public switched telephone
network. For users in Australia, the cord must be approved by the Australian Communications and Media
Authority.

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the USB cable, any

wireless network adapter, or the printer in the areas shown while actively printing.

Printer port

Function

LINE port

Connect the printer to an active telephone line through a standard wall jack (RJ

‑

11), DSL

ﬁlter, or VoIP adapter, or any other adapter that allows you to access the telephone line
to send and receive faxes.

Ethernet port

Connect the printer to a network.

USB printer port

Connect the printer to a computer.

Power cord socket Connect the printer to a properly grounded electrical outlet.

Set up, install, and conﬁgure

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands