Lexmark CX331 User Manual Download Page 169

Page: 169 / 204

Vertical dark lines

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Do vertical dark lines appear on prints?

Go to step 2.

The problem is
solved.

Step 2

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you use it.

Print the document.

Do vertical dark lines appear on prints?

Go to step 3.

The problem is
solved.

Troubleshoot a problem

169

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands