Lexmark CS943 User Manual Download Page 209

Page: 209 / 400

Menu item

Description

802.1x Authentication

Device Login Name

Device Login Password

Validate Serve Certiﬁcate (On*)

Enable Event Logging (Off*)

802.1x Device Certiﬁcate

Conﬁgure the settings for authenticating the 802.1x connection.

Allowable Authentication Mechanisms

EAP

‑

MD5 (On*)

EAP - MSCHAPv2 (On*)

LEAP (On*)

PEAP (On*)

EAP - TLS (On*)

EAP - TTLS (On*)

TTLS Authentication Method
(MSCHAPv2*)

Conﬁgure the allowed authentication mechanisms for the 802.1x
connection.

Note:

An asterisk (*) next to a value indicates the factory default setting.

LPD Conﬁguration

Note:

This menu appears only in network printers or printers that are attached to print servers.

Menu item

Description

LPD Timeout

0–65535 seconds (90*)

Set the time

‑

out value to stop the Line Printer Daemon (LPD) server

from waiting indeﬁnitely for hung or invalid print jobs.

LPD Banner Page

Off*

Print a banner page for all LPD print jobs.

Note:

A banner page is the ﬁrst page of a print job used as a

separator of print jobs and to identify the originator of the print job
request.

LPD Trailer Page

Off*

Print a trailer page for all LPD print jobs.

Note:

A trailer page is the last page of a print job.

LPD Carriage Return Conversion

Off*

Enable carriage return conversion.

Note:

Carriage return is a mechanism that commands the printer to

move the position of the cursor to the ﬁrst position on the same
line.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

209

Summary of Contents for CS943

















































































































































































































































































































































































































Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands

Lexmark CS943, User Manual

Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands