3
Unpack the memory card.
Warning—Potential Damage:
Avoid touching the connection points along the edge of the card.
4
Insert the memory card until it
clicks
into place.
5
Reattach the access cover.
6
Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY:
To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing an internal solutions port
CAUTION—SHOCK HAZARD:
To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer, and then unplug the power cord from the electrical outlet.
2
Using a flat
‑
head screwdriver, remove the controller board access cover.
Warning—Potential Damage:
Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.
Upgrading and migrating
118
Summary of Contents for CS820 Series
Page 1: ...CS820 CS827 User s Guide October 2017 www lexmark com Machine type s 5063 Model s 530 571...
Page 74: ...2 Remove the jammed paper Note Make sure that all paper fragments are removed Clearing jams 74...
Page 80: ...4 Close the staple guard 5 Insert the staple cartridge holder 6 Close door G Clearing jams 80...