Action
Yes
No
Step 3
a
Remove, and then reinstall the imaging unit or imaging kit.
Warning—Potential Damage:
Do not expose the imaging unit
or imaging kit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
Warning—Potential Damage:
To avoid damage, do not touch
the underside of the imaging unit or imaging kit.
b
Resend the print job.
Is the page or image still clipped?
Contact
The problem is
solved.
Toner easily rubs off
Leading edge
Trailing edge
ABC
DEF
Action
Yes
No
1
Depending on your operating system, specify the
paper type, texture, and weight from the Printing
Preferences or Print dialog.
Notes:
•
Make sure that the settings match the paper
loaded in the tray.
•
You can also change the settings on the printer
control panel.
2
Resend the print job.
Does the toner still rub off?
Contact
The problem is solved.
Uneven print density
Troubleshooting
99
Summary of Contents for CS720 Series
