Action
Yes
No
Replace the imaging unit or imaging kit, and then resend the print
job.
Warning—Potential Damage:
Do not expose the imaging unit or
imaging kit to direct light for more than 10 minutes. Extended
exposure to light can cause print quality problems.
Warning—Potential Damage:
To avoid damage, do not touch the
underside of the imaging unit or imaging kit.
Is the print density uneven?
Contact
The problem is
solved.
Vertical dark lines or streaks
ABCDE
ABCDE
ABCDE
Leading edge
Trailing edge
Action
Yes
No
a
Remove, and then reinstall the imaging unit or imaging kit.
Warning—Potential Damage:
Do not expose the imaging unit
or imaging kit to direct light for more than 10 minutes.
Extended exposure to light can cause print quality problems.
Warning—Potential Damage:
To avoid damage, do not touch
the underside of the imaging unit or imaging kit.
b
Resend the print job.
Do vertical dark lines or streaks still appear on prints?
Contact
The problem is
solved.
Vertical white lines
Leading edge
Trailing edge
Troubleshooting
100
Summary of Contents for CS720 Series
