Use
To
Separator Source
Tray [x]
MP Feeder
Specify the paper source for the separator sheet.
Note:
Tray 1 (standard tray) is the factory default setting.
Paper Saver
Off
2
‑
Up
3
‑
Up
4
‑
Up
6
‑
Up
9
‑
Up
12
‑
Up
16
‑
Up
Print multiple pages on a single sheet of paper.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that are printed per
side.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify the order in which pages are printed on a single sheet when using Paper
Saver.
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they
are in portrait or in landscape orientation.
Paper Saver Orientation
Auto
Landscape
Portrait
Specify the orientation in which pages are printed on a single sheet.
Note:
Auto is the factory default setting. The printer chooses between
portrait and landscape.
Paper Saver Border
None
Solid
Print a border when using Paper Saver.
Note:
None is the factory default setting.
Quality menu
Use
To
Print Mode
Color
Black Only
Specify whether images are printed in black and white or in color.
Notes:
•
Color is the factory default setting.
•
The printer driver is capable of overriding this setting.
Understanding the printer menus
90
Summary of Contents for CS410 series
