Use
To
Choose Network
Select an available network for the printer to use.
View Signal Quality
View the quality of the wireless connection.
View Security Mode
View the encryption method for the wireless network.
AppleTalk menu
To access the menu, navigate to either of the following:
•
Network/Ports
>
Standard Network
>
Standard Network Setup
>
AppleTalk
•
Network/Ports
>
Network [x]
>
Network [x] Setup
>
AppleTalk
Use
To
Activate
Yes
No
Enable or disable AppleTalk support.
Note:
No is the factory default setting.
View Name
Show the assigned AppleTalk name.
Note:
The AppleTalk name can be changed only from the Embedded
Web Server.
View Address
Show the assigned AppleTalk address.
Note:
The AppleTalk address can be changed only from the Embedded
Web Server.
Set Zone
[list of zones available on the
network]
Provide a list of AppleTalk zones available on the network.
Note:
The default zone for the network is the factory default setting.
Standard USB menu
Use
To
PCL SmartSwitch
On
Off
Set the printer to automatically switch to PCL emulation when a print job
received through a USB port requires it, regardless of the default printer
language.
Notes:
•
On is the factory default setting.
•
If PCL SmartSwitch is enabled, then the printer uses PostScript emulation.
•
If PCL SmartSwitch is disabled, then the printer does not examine
incoming data and it uses the default printer language specified in the
Setup menu.
Understanding the printer menus
76
Summary of Contents for CS410 series
