Action
Yes
No
Step 1
a
Move the width and length guides in the tray to the correct
positions for the size of the paper loaded.
b
Resend the print job.
Is the print still skewed?
Go to step 2.
The problem is
solved.
Step 2
a
Check if you are printing on a paper that is supported by the
tray.
b
Resend the print job.
Is the print still skewed?
Contact
The problem is
solved.
Streaked horizontal lines appear on prints
ABCDE
ABCDE
ABCDE
Action
Yes
No
Step 1
a
Depending on your operating system, specify the tray or feeder
from Printing Preferences or the Print dialog.
b
Resend the print job.
Do streaked horizontal lines appear on prints?
Go to step 2.
The problem is
solved.
Step 2
From the printer control panel, set the paper type and weight in
the Paper menu to match the paper loaded in the tray.
Do the paper type and weight match the paper in the tray?
Go to step 3.
Do one or more of
the following:
•
Specify the paper
type and weight
from the tray
settings to match
the paper loaded
in the tray.
•
Change the
paper loaded in
the tray to match
the paper type
and weight
specified in the
tray settings.
Troubleshooting
181
Summary of Contents for CS410 series
