Print is too dark
Action
Yes
No
Step 1
a
From the Quality menu on the printer control panel, select
Color Adjust
.
b
Resend the print job.
Is the print still too dark?
Go to step 2.
The problem is
solved.
Step 2
a
From the Quality menu on the printer control panel, reduce the
toner darkness.
Note:
4 is the factory default setting.
b
Resend the print job.
Is the print still too dark?
Go to step 3.
The problem is
solved.
Step 3
a
From the printer control panel, set the paper type, texture, and
weight in the Paper menu to match the paper loaded in the tray.
b
Resend the print job.
Is the tray set to the type, texture, and weight of the paper loaded?
Go to step 4.
Change the paper
loaded in the tray to
match the paper
type, texture, and
weight specified in
the tray settings.
Step 4
a
Depending on your operating system, specify the paper type,
texture and weight from Printing Preferences or from the Print
dialog.
b
Resend the print job.
Is the print still too dark?
Go to step 5.
The problem is
solved.
Step 5
Check if the paper loaded in the tray has texture or rough finishes.
Are you printing on textured or rough paper?
From the printer
control panel, set the
paper texture in the
Paper menu to match
the paper loaded on
the tray.
Go to step 6.
Troubleshooting
175
Summary of Contents for CS410 series
