Lexmark CS410 series, User Manual

Page: 168 / 210

Action Yes No
a
Check if the distance between the defects is equal to one of
the following:
•
25.1 mm (0.98 in.)
•
29.8 mm (1.17 in.)
•
43.9 mm (1.72 in.)
•
45.5 mm (1.79 in.)
•
94.2 mm (3.70 in.)
b
If the distance between the defects equals 25.1 mm (0.98 in.),
29.8 mm (1.17 in.), or 94.2 mm (3.70 in.), then replace the
photoconductor unit.
c
If the distance between the defects equals 43.9 mm (1.72 in.) or
45.5 mm (1.79 in.), then replace the developer unit.
Do the repeating defects still appear?
1
Check if the
distance
between the
defects is equal
to one of the
following:
•
37.7 mm
(1.48 in.)
•
78.5 mm
(3.09 in.)
•
95 mm
(3.74 in.)
2
Take note of the
distance, and
then contact
customer
support
or your
service
representative.
The problem is
solved.
Tray linking does not work
Notes:
•
The trays can detect paper length.
•
The multipurpose feeder does not automatically detect the paper size. You must set the size from the
Paper Size/Type menu.
Action Yes No
Step 1
a
Open the trays, and then check if they contain paper of the
same size and type.
•
Check if the paper guides are in the correct positions for
the size of the paper loaded in each tray.
•
Check if the paper size indicators on the paper guides are
aligned with the paper size indicators on the tray.
b
Resend the print job.
Do the trays link correctly?
The problem is
solved. Go to step 2.
Troubleshooting 168