Action
Yes
No
Step 4
a
Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings
>
General Settings
>
Print Recovery
>
Page Protect
>
Off
b
Resend the print job.
Did the job print?
The problem is
solved.
Go to step 5.
Step 5
a
Check if the cable connections to the printer and print server
are secure. For more information, see the setup documentation
that came with the printer.
b
Resend the print job.
Did the job print?
The problem is
solved.
Go to step 6.
Step 6
Install additional printer memory, and then resend the print job.
Did the job print?
The problem is
solved.
Contact
Repeating defects appear on prints
)
)
)
Troubleshooting
167
Summary of Contents for CS410 series
