Lexmark CS410 series, User Manual

Page: 105 / 210

Using the printer control panel
1
From the printer control panel, navigate to:
> Settings > > Settings > > General Settings > > Timeouts > > Hibernate Timeout >
2
Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode.
3
Press .
Using Schedule Power Modes
Schedule Power Modes lets you schedule when the printer goes into a reduced power state or into the Ready
state.
Note: This feature is available only in network printers or printers connected to print servers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Schedule Power Modes .
3
From the Action menu, select the power mode.
4
From the Time menu, select the time.
5
From the Day(s) menu, select the day or days.
6
Click Add .
Adjusting the brightness of the printer display
To save energy, or to make the display easier to read, adjust its brightness settings.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings .
3
In the Screen Brightness field, enter the percentage of the brightness you want for the display.
4
Click Submit .
Saving money and the environment 105