Lexmark CS310 Series, User Manual

Page: 169 / 188

Action Yes No
Step 3
Make sure you are using a recommended type of color
transparency, and then resend the print job.
Does the print on the color transparency look lighter?
The problem is
solved. Contact customer
support .
The color of the print does not match the color of the original file
Note: The color conversion tables used in Auto Color Correction mode generally approximate the colors of a
standard computer monitor. However, because of technology differences that exist between printers and
monitors, there are many colors that can also be affected by monitor variations and lighting conditions.
Action Yes No
Step 1
a
Set Color Correction to Off.
Note: When the printer color correction is disabled, the color
is based on the print job information, and no color conversion
is implemented.
b
Resend the print job.
Does the color of the print match the color of the file on the
computer screen?
The problem is
solved. Go to step 2.
Step 2
From the Quality menu on the printer control panel, do the
following:
a
Select Color Correction , and then select Manual .
b
Select Manual Color , and then select the appropriate color
conversion table for the affected object type.
c
Resend the print job.
Does the color of the print match the color of the file on the
computer screen?
The problem is
solved. Contact customer
support .
The print appears tinted
Action Yes No
Adjust the color balance.
a
From the Color Balance menu on the printer control panel,
increase or decrease the values for cyan, magenta, yellow, and
black.
b
Resend the print job.
Does the print still appear tinted?
The problem is
solved. Contact customer
support .
Troubleshooting 169