Lexmark C9235 User Manual Download Page 12

Page: 12 / 246

–

Away from the direct airﬂow of air conditioners, heaters, or ventilators

–

Free from direct sunlight and humidity extremes

•

Observe the recommended temperatures and avoid ﬂuctuations.

Ambient temperature 10 to 30°C (50 to 86°F)

Storage temperature

-10 to 40°C (14 to 104°F)

•

Allow the following recommended amount of space around the printer for proper ventilation:

Top

150 mm (5.9 in.)

Rear

120 mm (4.8 in.)

Right side 400 mm (15.7 in.)

Front

444.5 mm (17.5 in.)

Left side

120 mm (4.8 in.)

Printer conﬁgurations

Note:

Make sure to conﬁgure the printer on a ﬂat, sturdy, and stable surface.

Learning about the printer

Summary of Contents for C9235























































































































































































































































Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands

Lexmark C9235, User Manual

Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands