4
Set aside the printer hard disk.
5
Close the controller board access cover.
Installing hardware options
Order of installation
CAUTION—POTENTIAL INJURY:
The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
CAUTION—SHOCK HAZARD:
If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them off as well, and unplug any cables going into the printer.
Install the printer and any optional tray in the following order:
•
Optional 550
‑
sheet tray (Tray 3)
•
Optional 650
‑
sheet duo tray with integrated multipurpose feeder (Tray 2)
•
Printer
Installing optional trays
The printer supports two optional input sources: a 550
‑
sheet tray (Tray 3) and a 650
‑
sheet duo tray (Tray 2)
with an integrated multipurpose feeder.
CAUTION—POTENTIAL INJURY:
The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
Additional printer setup
32
Summary of Contents for C2132
