Lexmark C2132, User Manual

Page: 17 / 226

Setting up and using the home screen
applications
Notes:
•
Your home screen may vary depending on your home screen customization settings, administrative
setup, and active embedded applications. Some applications are supported only in some printer models.
•
There may be additional solutions and applications available for purchase. For more information, go to
www.lexmark.com or contact the place where you purchased the printer.
Finding the IP address of the computer
For Windows users
1
In the Run dialog box, type
cmd
to open the command prompt.
2
Type
ipconfig
, and then look for the IP address.
For Macintosh users
1
From System Preferences in the Apple menu, select Network .
2
Select your connection type, and then click Advanced > TCP/IP .
3
Look for the IP address.
Accessing the Embedded Web Server
The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings
even when you are not physically near the printer.
1
Obtain the printer IP address:
•
From the printer control panel home screen
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as
123.123.123.123
.
2
Open a Web browser, and then type the printer IP address in the address field.
3
Press Enter .
Note: If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Setting up and using the home screen applications 17