LEXIUM MHDA1004, User Manual

Page: 63 / 204

49
Cable Shield Connections
Connecting
Cable Shields to
the Front Panel The following procedure and associated diagram describe how to connect cable
shields to the front panel of the 17D drive:
Continued on next page
Step Action
1 Remove a length of the cable’s outer covering and braided shield sufficient to
expose the required length of wires.
2 Secure the exposed wires with a cable tie.
3 Remove approximately 30 mm of the cable’s outer covering while ensuring the
braided shield is not damaged during the process.
4 At the front panel of the drive, insert a cable tie into a slot in the shielding rail.
5 Use the previously inserted cable tie to secure the exposed braided shield of
the cable firmly against the shielding rail.