-29B
LX-PR-29B Infrared Sensor Instruction
105mm
59mm
88.0mm
105mm
58mm
The product is a new saving-energy switch, it adopts good sensitivity
detector, integrated circuit and SMT. It gathers automatism, convenient safe,
saving-energy and practical functions. Three detectors inside compose a
wide range detection field, it utilizes the infrared energy from human as
control-signal source, it can start the load at once when one enters detection
field. It can identify day and night automatically. It is easy to install and used
widely, possessing the functions of power show and detecting show.
Summary
Power source: 220-240V/AC,50Hz
100-130V/AC,60Hz
Rated load: 1200W Max.tungsten (220-240V/AC)
300W Max.fluorescent (220-240V/AC)
600W Max.tungsten (100-130V/AC)
150W Max.fluorescent (100-130V/AC)
Standby power: working 0.45W(static 0.1W)
Time setting: 10sec~12min(adjustable)
Light-control: 10LUX~2000LUX(adjustable)
Detection range: 3-10m (radii.)(adjustable)
Detection angle: 360º (ceiling installation)
Installation height: 2.5~3.5m
Working temperature: -10°C~+40°C
Sense motion speed: 0.6~1.5m/s
Sensor´s LED:
1. It always light after switch on power, and be off after the unit enter working state.
2. It light once when the unit receives sensing signal.
Height of installation2.5~3.5m
2.5~3.5m
Specifications
Function
Sensing angle range
Sensing distance adjustment range
Height of installation2.5~3.5m
2.5~3.5m
Sensor information
10m
3m
3m
360°
10m
3 X Detectors 3-10m
You can manually adjust the time setting, sensitivity and light-control (For detail: see 1.knob setting); it is very
easy to use. Install sensor at 2.5~3.5m position on the wall (For detail: see 3. installation instruction) and
connect the wire according to the 2. connection figure. Switch on power, after about 1 minute the unit enter
stable working state. Here please turn TIME knob to the position close to minimum, and turn LUX to sun for
testing. If it works normally, turn the TIME knob to the minimum” IMPULSE” position( ). When it senses
again, the controlled lamp will be turned on and off regularly. If the above tests go through, then select the time,
light-control and sensitivity to your need. So its installation is ok.