Lexing LX-LD105P-ADS Quick Start Manual Download Page 1

Power source: 100-240V/AC,  50/60Hz

Rated LED: 15W Max.(AC)

                    8W Max.(DC)

Charging power: 7W Max.(light off )

                           3W Max.(light on )

HF system: 5.8GHz 

Battery: 7.4V / 2000mAH lithium battery

             7.4V / 1600mAH lithium battery

Continuous illumination time: 180min/ 120min

Transmission power: <0.3mW

Time setting: 6sec to 12min (adjustable)

Light-control: 10-2000LUX(adjustable)

Detection range: 1-10m (radii.) (adjustable)

                           (Installation height: 2.5m)

Detection angle: 360°

Luminous flux:  1000lm(AC)    330lm(DC) (warm white)

Installation height: 2.5-3.5m (ceiling mount)

Working temperature: -20~+55

Lamp part

LED quantity: 96PCS

LED specifications: T5050

Summary

LX-LD105P-ADS Microwave Sensor Lamp Instruction

Specifications

Name of each part 

IP 54

Microwave Sensor Lamp 

1X

Instruction 

1X

4X

4X

Quantity

Packing list in

Φ6 

Plastic Expansion

4x30 Screw

This is a newly designed intelligent ceiling mount microwave sensor LED lamp, with the 

extra function of power supply in emergency. The lighting is auto-managed by AC direct 

power  or  battery  backup,  that  is,  when  power  failure,  the  battery  backup  will  be 

responsible for the power supply of 8 watt. When light on, the luminous flux will be more 

than 800 lm, equivalent to twice that of 60 watt incandescent lamp(≈400lm). The battery 

backup can continuously supply power for more than 3hours / 2 hours or even more in 

the  sensor  energy-saving  mode.  It  is  widely  applied  in  the  corridor,  washing  room, 

elevator lobby etc.

This  product  is  designed  with  two  configurations:  one  is  the  sensor  lamp  with  the 

function of supplying power in emergency and the other one is the intelligent sensor 

lamp without the emergency function. You can make purchase according to the practical 

need. But in most cases, it is necessary and wise to choose the former one, for that the 

occasional power outage will cause trouble, or even danger. 

Microwave sensor

Threading hole

Threading hole

Battery

Mounting holes

Mounting holes

Mounting holes

Wiring

Knob

Mounting holes

The switch controlling the battery 

320mm

111mm

Use high quality PC lampshade.Strengthen the flexible refraction 

of light.And its function of anti-ultraviolet makes the shade not 

easy to turn yellow and be broken.

LED lamp consumes power 80% less

than incandescent lamp and 50% less

than fluorescent lamp.

PC lampshade

Lampshade 

fixed hole

Lampshade 

fixed hole

Lampshade 

fixed hole

Summary of Contents for LX-LD105P-ADS








Reviews: