LEXIBOOK DJA100, Instruction Manual

Page: 32 / 116

32
ENGLISH
Helmet Mount with Strap
1. Insert your camera in the waterproof case (18) or in the non-
waterproof mount also provided.
2. Fasten the camera in its case to the helmet mount (19) in the
place where the attachment screw (25) is located. Firmly screw
it in to ensure effective fastening.
3. You can adjust the camera’s angle by unscrewing and then
carefully fitting the removable part where the camera (26) is
located. Ensure that this part is firmly screwed in again in order
to ensure effective fastening.
4. Connect the strap (27) to the two ends of the helmet mount.
5. Position the strap around the helmet or any other stand of
your choice, and then tighten its ends until it is firmly attached.
Strapless Helmet Mount
1. Follow the first 3 steps described above. You may also follow
all 5 steps above if you wish to attach the camera both with its
strap and with its adhesive fastener (recommended).
2. Next glue one side of the adhesive fastener (25) to the back
of the helmet mount (19) while you glue the other side to your
helmet or any other stand that you wish to use.
Remark: We recommend that you not only use the adhesive
fastener to attach the camera when engaging in extreme sports.
Combine the adhesive fastener with the strap provided, or
purchase a more durable adhesive fastener for such activities.
Note: The waterproof case must be properly closed again and it
is only waterproof to a depth of 10 metres.
HELMET MOUNT (Assembly)
28
19
18
25
26
27
We, Lexibook® S.A.
2, avenue de Scandinavie
91953 Courtaboeuf Cedex – France
Declare under our sole responsibility that the following product:
Kind of product: Move Cam
Type designation: DJA100
Is in compliance with the following standards:
EN 60950-1: 2006 +A11 : 2009 +A1 : 2010 +A12 : 2011
EN 300 328 V1.7.1
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 62479 : 2010
We hereby declare that the above mentioned product is in
compliance with the R&TTE Directive (1999/5/EC) of the
European Commission.
Yiu Wai Man
Product Development Manager
09/08/2013 (Hong Kong)
CONFORMITY DECLARATION
DJA100IM1363_6Sept_V06.indb 32 06/09/2013 5:38 PM