Lex 3I525D Page 16 Manual Download

Page: 16 / 80

Hardware Installation

This chapter provides the information how to install the hardware of 3I525D / 3I525U.

Please follow section 1-5, 2-1 and 2-2 to check the delivery package and unpack

carefully. Please follow the jumper setting procedure.

Chapter-2

2-1 Unpacking Precaution

The 3I525D / 3I525U board has been well packed with an anti-static bag to protect its

sensitive components and circuitry from damage due to static electric discharge.

You should follow these

steps to protect the board from the static electric

discharge whenever you handle the board:

1. Ground yourself by a grounded wrist strap at all times when you

handle the 3I525D / 3I525U.

Well secure the ALLIGATOR clip of the strap to the end of the shielded wire lead from

a grounded object. Please put on and connect the strap before handling the

3I525D / 3I525U for harmlessly discharge any static electricity through the strap.

2. Please use anti-static pad to put any components, parts, or tools on the pad whenever

you work on them outside the computer. You may also use the anti-static bag instead of

the pad. Please ask your local supplier for necessary parts on anti-static requirement.

3. Do not plug any connector or set any jumper when the power is on.

1. Do not touch the board or any other sensitive components without all necessary

anti-static protection.

2. Please pay attention to the voltage limitation of DC-IN12 V 5 %.

Overuse of DC-IN voltage limitation or change to another power adapter

( not provided with this system ) will VOID warranty.

NOTE!

Summary of Contents for 3I525D

















































































Search results

Summary of Contents for 3I525D

Reviews:

Related manuals for 3I525D

Brands by name

Popular brands

Lex 3I525D, Manual

Search results

Summary of Contents for 3I525D

Reviews:

Related manuals for 3I525D

Brands by name

Popular brands