1
0 Db (a) seLF noise
sHHH ...
THe
w
orLD‘s QuieTes
T
s
TuDio conDenser Micr
oPHone
//
LcT 550
QuicksTarT GuiDe
//
user interface
1
status indicator
//
Indicates different active settings such as key
lock, automatic attenuation, clipping history ... see below for details
2
Pre-attenuation
//
Use to prevent clipping when recording very
loud sources. Change settings with the right pushbutton (
6
)
3
Low-cut fi lter
//
Use to reduce unwanted low frequency noise
caused by wind, footsteps, structure-borne noise or likewise. Change
settings with the left pushbutton (
4
)
4
Left push button
//
Push to change low-cut settings. Also activates
Clipping History.
Clipping History
//
Pressing the left pushbutton for more than
two seconds activates and deactivates the Clipping History. If
clipping occurred since last time you have entered the Clipping
History, the Status Indicator (
1
) blinks red, the manually set
level of pre-attenuation blinks and the suggested attenuation
setting is illuminated. The history will be cleared after leaving the
Clipping History mode
5
center pushbutton
//
Pressing the center pushbutton for more
than two seconds activates (Status Indicator (
1
) not illuminated) and
deactivates (Status Indicator (
1
) turns white) the
key lock.
6
Right pushbutton
//
Push to change attenuation settings. Also
activates Automatic Attenuation.
automatic attenuation
//
Pressing the right push button for
more than two seconds activates (Status Indicator (
1
) turns red)
and deactivates (Status Indicator (
1
) turns white) Automatic
Attenutation. In this mode the microphone adjusts the
attenuation setting automatically when clipping has occurred.
VisiT our
websiTe
!
reaD THe
FuLL ManuaL
!
waTcH ViDeos, reaD reViews anD Learn
How To GeT THe MosT ouT oF Your LcT 550
www.lewitt-audio.com/LCT-Series/LCT-550
Learn eVerYTHinG abouT Your LcT 550
www.lewitt-audio.com/resources/manuals/LCT-550.pdf
