• Range up to 75 feet between Lumina RF devices.
• Installs into any single gang device back-box.
• Supports multi-gang installations.
• Multiple devices may be used within the same room for control from
multiple locations or to control multiple loads.
• Each room requires at least one room controller.
• Requires Decora
®
faceplate, sold separately.
• DL057 uses 0-10Vdc low voltage control wires which may be
installed using Class 1 or Class 2.
INSTALLATION NOTE (DL057):
0-10V Control Wiring - Connect the
Violet wire to the + 0-10V line and the Gray wire to the 0-10V common
using Class 1 or Class 2 wiring methods as indicated in these instructions,
EDOODVW¿[WXUHGULYHULQVWUXFWLRQVRUEDOODVW¿[WXUHGULYHUODEHOPDUNLQJV
Observe all requirements of any authority having jurisdiction with respect
to wire type, sleeving, isolation methods, and the like.
The Lumina RF DL057 Wallstation Dimming Room Controller and DL05S
Wallstation Switching Room Controller are designed to be used to
FRRUGLQDWHDQGFRQWUROFRPSDWLEOH=LJ%HHHQDEOHGODPSV¿[WXUHVORDG
controllers and wireless sensors within a room. The Wallstation Room
Controllers can directly control lighting loads and/or be expanded with
other Lumina RF devices. It provides all energy management functionality
as required by code and as desired by the user. All aspects of the system
FDQEHFRQ¿JXUHGWRPHHWWKHVSHFL¿FQHHGVRIWKHHQGXVHUDQGWKHLU
DSSOLFDWLRQ$OOFRQ¿JXUDWLRQLVPDGHXVLQJWKH/HYLWRQ/XPLQD5)6$DSS
from your smartphone or other Bluetooth
TM
enabled Android
TM
or
iOS
TM
device.
WARNINGS
•
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT
BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
• To be installed and/or used in accordance with appropriate electrical codes and
regulations.
• If you are unsure about any part of these instructions, consult an electrician.
CAUTIONS
• Use this device with
copper or copper clad wire only.
• For indoor applications only.
• Save these instructions.
PK-A3300-10-00-2A
© 2019 Leviton Mfg. Co., Inc.
WARNING
:
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER
at circuit breaker or fuse and test that power is off before wiring!
When room controller is also powering load:
1.
Strip 3/4 in. and connect as per wiring diagram.
(QVXUHZLUHVDUH¿UPO\DWWDFKHGDQGWKHUHLVQRH[SRVHGFRSSHU
Before Installation
Product Description
Installation
Wall Station Room Controller: 0-10V Dimmers & Switch
Cat. DL057-D0Z, Ratings: 120-277VAC, 0-10V
Cat. DL057-30Z, Ratings: 347VAC, 0-10V
Cat. DL05S-D0Z, Ratings: 120-277VAC, Switch
INSTALLATION AND QUICK START SHEET
ENGLISH
PK-A3300-10-00-2A
Line
120/277VAC,
50/60Hz.
Blue
White
Hot (Black)
Black
Neutral (White)
White
Load
Green
Ground
To release, push sides.
Line up and press in to attach.
Black
Blue
Green
White
Load
Neutral
Line (Hot)
Ground
0-10 VDC
Ballast/LED Driver
Black
Blue
Black
Hot (Black)
Gray
Neutral (White)
Line
Electrical Box
White
White
Sleeve
Violet
Connectors
Green
Ground
Switch DL05S
Switch DL05S
Dimmer DL057
Dimmer DL057
2.
Gently place the wires and your device into the wall box and attach
with screws provided.
4.
If desired, change faceplate color.
5.
Install Decora wallplate.
White
Load
Neutral
Line (Hot)
Ground
Blue
Green
Violet
Gray
Black
3.
Restore power and test ON/OFF operation. Locator light should be
ON when switch power is turned OFF.
WEB
VERSION
