The GreenMAX DRC Power Supply provides power to the LumaCAN
network. Can be used to add power to a network when power is needed.
WARNINGS
•
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE
AND TEST THAT POWER IS OFF BEFORE WIRING!
• Do not mount near gas or electric heaters.
• The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
• Test all LumaCAN cables for compliance to TIA-568B prior to interconnecting devices and
systems.
• Equipment should be mounted in locations and at heights where it will not be subjected to
tampering by unauthorized personnel.
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• If you are unsure about any part of these instructions, consult an electrician.
CAUTIONS
• Do not use this equipment for other than intended use.
• For indoor applications only.
SAVE THESE INSTRUCTIONS
WARNING
:
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER
at circuit breaker or fuse and test that power is off before wiring!
NOTE:
This is an ESD Sensitive Device. Use safe ESD handling
procedures when installing.
1.
Mounting Options.
Product Description
Installation
DRC
TM
Power Supply
Cat. No. DRC00-0D0
INSTALLATION AND QUICK START SHEET
ENGLISH
DI-000-DRC00-02A
2.
Line Voltage Wiring: Connect per wiring diagram.
a.
Mount to junction
box using nipple
and mounting nut
provided.
b.
Mount to top of 4 in. sq. junction box with minimum
volume 30.3 cu. in. or greater (4 in. x 4 in. x 2.125 in.)
using the provided screws.
NOTE:
Ensure that conduit/cable entry clamp is
located in a corner of junction box opposite the
*UHHQ0$;'5&QLSSOHDVFRQÀLFWVPD\RFFXU
NOTE:
Dress wires to provide enough clearance
when device is installed.
Nipple
Mounting Screws
SPECIFICATIONS
Cat. No.
DRC00-0D0
Input Voltage/Frequency
120-277VAC, 50/60Hz
Input Power
Max
17.5W @ 120V
16.5W @ 277V
Standby
0.3W @ 120V
0.45W @ 277V
LumaCAN Data
Pass-through
RJ-45 connectors
LumaCAN Power
500mA, 24Vdc
IP Rating
IP30
GreenMax
®
WEB
VERSION
