Auto Sequencing Mode
The DDS 6000 dimmers can be configured to perform stand alone Automatic Sequencing in place of Auto Lamp Test. This is
useful for lighting displays and show windows. The four channels will automatically fade from one to another in a preprogrammed
pattern and time selected by the front panel dipswitch whenever front panel dipswitch #8 is up and no multiplex signal is detected.
The Analog control input will continue to operate while the dimmer is sequencing.
To enable Automatic Sequencing Mode move the switch on the
internal configuration dipswitch
#2 to OFF.
Front panel Dipswitch sequence settings. (not internal dipswitch)
STEP TIME
SWITCH 1,2,3
PATTERN
SWITCH 4,5,6
1 SECOND
OFF,OFF,OFF
2 CHAN BUILD
OFF,OFF,OFF
3 SECOND
ON,OFF,OFF
3 CHAN SEQUENCE
ON,OFF,OFF
5 SECOND
OFF,ON,OFF
3 CHAN BUILD
OFF,ON,OFF
10 SECOND
ON,ON,OFF
2&4 CHAN ALT
ON,ON,OFF
15 SECOND
OFF,OFF,ON
4 CHAN SEQUENCE
OFF,OFF,ON
30 SECOND
ON,OFF,ON
4 CHAN BUILD
ON,OFF,ON
45 SECOND
OFF,ON,ON
4 CHAN BUILD +
OFF,ON,ON
60 SECOND
ON,ON,ON
4 CHAN RANDOM
ON,ON,ON
Dipswitch # 7 on causes all above sequences to ping-pong.
DDS 6000 DIMMER PACK
Software Revision 1.0 and above, Version C, UL Versions
8
NSI CORPORATION
Summary of Contents for DDS6000
Page 9: ...NSI CORPORATION 9 ...
Page 10: ...10 NSI CORPORATION ...
