EXT-100-Main
• Paired with EXT-100-Remote
• Up to 30 W PoE
• Local power option
• IEEE compliant
EXT-100-Main Extender Applications
EXT-100-Main Quick Install Guide
The EXT-100-Main Extender Solution is designed to supercharge the downlink ports of a
standard Ethernet switch delivering 10/100 Mbps symmetrical (full duplex) and PoE over
four-pair UTP infrastructure with distances up to 2,000 ft (610 m). The EXT-100 offering is
designed specifically to enable easy deployment over UTP for reaches beyond that of
standard Ethernet eliminating the costs and disruption associated with IDF closet
requirements.
Link
Activity
Activity
37-55V
DC IN
Link/Speed
Green:
100Mbps
Orange:
10Mbps
To Remote
(EXT-100-Remote)
To Switch
1. Remove the EXT-100-Main from its packaging.
2. Must ensure cable is properly terminated before connecting any EXT-100 product.
3. Remove all legacy equipment from the UTP cable infrastructure.
NOTE:
In order to avoid damage to devices, it is important that only IP devices are connected when you
connect the EXT-100-Main.
4. Connect EXT-100-Main (Switch side) to downlink port on switch.
5. Connect the Network Infrastructure cable from the EXT-100-Main (Remote side) to EXT-100-Remote (Main
side)
6. Using Cat 5e or higher category cable, connect the device to the EXT-100-Remote (Device side).
NOTE:
Berk-Tek recommends using LANmark IP (22AWG) or higher for indoor applications; LANmark-6 OSP,
LANmark-1000 OSP, or LANmark-10G OSP should be used for outdoor applications.
The EXT-100-Remote must be installed either indoors or in a NEMA rated box appropriate for the installation
environment.
Installations must be compliant with the requirements of the local authority having jurisdiction.
1-800-BERK-TEK (1-800-237-5835) | +1-717-354-6200
www.leviton.com/ns
Copyright 2019 Berk-Tek LLC.
445-0028-A
Fast Ethernet and PoE+ (Up to 30 W) over UTP
EXT
-100-Main
TO REMOTE
37-55V
10 GR
ACT
LNK
SPD
100 GR
TO SWITCH
ACT
LNK
10/100 Mbps (full duplex, symmetrical) & PoE+ over UTP with 2,000 ft (610 m) reach.
EXT-100-Main
*
EXT-100-Remote
Standard PoE Switch
Local Power Option
Four-Pair UTP Cable
up to 2,000 ft (610 m)
3519
11
7
15
17
13
21
23
19
27
29
25
33
35
31
39
41
37
45
47
43
462
10
12
8
16
18
14
22
24
20
28
30
26
34
36
SFP+1
SFP+2
SFP 1
SFP 2
32
40
42
38
46
48
44
*EXT-100-Main can be powered locally for use with non-PoE switches.
EXT
-100-Remote
Main
Device
Redefine the limits
DEVICE
EXT-100 max. power 30 W
The max length supported
between the EXT-100-Main
and the PoE Switch is 328 ft
(100 m)
The max length supported
between the EXT-100-Remote
and the Device is 328 ft
(100 m)
