background image

Building the frame

Locate the left leg assembly (3). Insert two wood dowels (A) into the upper
and lower holes in the side of the leg. Insert a cam lock screw (B) into the
middle hole. Be sure that the slot in the screw is parallel to the floor when
fully tightened.

Locate  the  back  apron  (2).  Insert  a  cam  lock  nut  (C)  into  the  hole  on  the
inside  of  the  apron.  Be  sure  that  the  openings  in  the
sides of the nut are parallel with the floor. Carefully slip
the leg assembly into the holes on the side of the apron,
so that the cam lock screw slides into the cam lock nut.
Insert a cam lock set screw (D) into the nut and tighten.

Repeat for the right side leg (4).

2

2

4

3

     1 pc

                              8 pcs

C

D

G

A

B

                              2 pcs

C                              2 pcs

D                              2 pcs

G

                              15 pcs

F                              4 pcs

F

 

     1 pc

3     1 pc

4     1 pc

H               

Slot parallel to the floor

1

E

3

4

     1 pc

A                              8 pcs

C

E

G

E E

                              2 pcs

C                              2 pcs

D                              2 pcs

G

A

A

A

A

                              15 pcs

F                              4 pcs

F

 

     1 pc

3     1 pc

4     1 pc

H               

2

Attaching the top

Locate  the  desk  top  (1).  Insert  4
wood  dowels  (A)  into  the  holes
at  the  corners.  Set  the  leg
assembly on top of the dowels.

Insert  the  15  long  bolts  (E) into
the  holes  on  the  underside  of
the assembly, and fully tighten.

Insert  leg  levelers  (F)  into  each
leg.  Adjust  each  until  the  desk
sits at a level position.

3

     1 pc

A                              8 pcs

C

                              2 pcs

C                              2 pcs

D                              2 pcs

G

                              15 pcs

                              4 pcs

F

F

F

F

F

 

     1 pc

3     1 pc

4     1 pc

H               

2

E U R O   D E S K   S Y S T E M

Parts list

Unpack and lay the parts on a clean, flat surface. Check that you have all the
parts  shown  in  the  diagram  below.  You  will  need  an  additional  flat-head
screwdriver.

The Levenger Euro Desk
system  is  designed  to
provide  both  computer
and  traditional  desk
space.  Euro  Desks  are
sized  for  use  at  home  or
in  the  office.  They  can
wrap  around  you  to  the
left, right, or on all sides,
conforming  to  the  size
and space in your room.

Either the large or medium desk can be enhanced with optional accessories

such as drawers, keyboard tray, and 3-drawer storage trolley.

Levenger Euro Desks are made with solid wood legs and thick, high-quality

cherry veneer tops.

1

E U R O D E S K A S S E M B LY

1     1 pc

A                              8 pcs

C

                              2 pcs

C                              2 pcs

D                              2 pcs

G

                              15 pcs

F                              4 pcs

F

 

2     1 pc

3     1 pc

4     1 pc

               

2

     1 pc

A                              8 pcs

C

B                              2 pcs

C                              2 pcs

D                              2 pcs

G

E                              15 pcs

F                              4 pcs

F

       

     1 pc

4     1 pc

H               

2

Summary of Contents for Euro Desk System

Page 1: ...wels A into the holes at the corners Set the leg assembly on top of the dowels Insert the 15 long bolts E into the holes on the underside of the assembly and fully tighten Insert leg levelers F into each leg Adjust each until the desk sits at a level position 3 1 pc C F F F F F 1 pc 3 1 pc 4 1 pc E U R O D E S K S Y S T E M Parts list Unpack and lay the parts on a clean flat surface Check that you...

Page 2: ... top For alignment see the diagrams following A 3 pcs B C 6 pcs 4 A B A A 3 6 Euro drawer Large drawer 1 2 3 4 A 4 pcs D C 4 pcs E 4 pc B 4 pcs A A A A B B B B D C C C C D 1 2 4 3 Installing the tray Insert four mini lock screws B into the front panel 2 Slide the screws into the holes on the front of the tray 1 Insert mini lock nuts A into the holes in the tray Turn the nuts 1 2 turn clockwise to ...

Page 3: ...leg and tighten Repeat for each of the legs Insert leg levelers D into each leg Adjust each until the desk sits at a level position 2 B D E C Parts list Unpack and lay the parts on a clean flat surface Check that you have all the parts shown in the diagram below 1 Attach the casters While holding the drawers in place flip the trolley upside down on a clean work surface a piece of the Styrofoam pac...

Page 4: ...o Desk System Visit us online at Levenger com to read customer reviews of this product or to write your own review To place an order or request our catalog call 800 544 0880 or visit us online Sign up on the home page to become a member of our Preferred Customer E List and be the first to see our new products and receive exclusive offers and gifts with purchase 2012 Levenger FTS FD0185 FD0180 06 1...

Reviews: