Windows SMB Printing
This method requires no additional software to be installed, but the NetBEUI or TCP/IP
protocol must be installed on your PC. Use the following procedure to install the WPS-0104
LevelOne Wireless Printer Server's printer as a Windows SMB network printer:
1. Double-click
the
Network Neighborhood
icon on the desktop.
2. On
the
View
menu, select
Details
.
3. Locate the desired WPS-0104 LevelOne Wireless Printer Server, as shown below:
•
If it is the same Workgroup as your PC, it will be listed on screen.
•
If it is in a different workgroup, double-click
Entire Network
, then double-click the
appropriate Workgroup to open it.
Figure 13: Network Neighborhood
4. Double-click the WPS-0104 LevelOne Wireless Printer Server icon to view a Printer icon
for each printer port. The "Comment" field may indicate what type of printer is connected
to the port.
5. To install a printer, right-click the desired printer icon, and choose "Install", as shown
below. This will start the
Add Printer
wizard.
Figure 14: Install SMB Printer
6. Follow the prompts to complete the installation.
•
For information about the question "Do you print from MS-DOS programs?", see
Printing from MS-DOS Programs
below.
•
Select the Printer Manufacturer and Model to match the printer connected to this port
on the WPS-0104 LevelOne Wireless Printer Server, and complete the Wizard.
Page 19
