IEC-1800
10/100 Industrial Media Converter, SC MM 2KM, -40 to 75C
IEC61850
Quick Installation Guide
v1.00
‐
1209
IEC-1800 Page
1
Overview
LevelOne IEC-1800 is an industrial Fast Ethernet media converter
with a rugged aluminium case which providing superb heat
dissipation. This converter is designed to be mounted on an
industrial standard DIN-rail, plus the clearly visible status LEDs
provide simple monitoring of port link activity. It also features Link
Fault Pass Through in order to alert remote location when link
status changes
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including Electric
& Utility, Critical Infrastructure, Transportation and Surveillance
Security. This device operates under -40 to 75 Celsius (-40 to 167
Fahrenheit) temperature.
Safety
Complies with NEMA (National Manufacturers Association) TS1 &
TS2 Environmental certified for the Traffic Control Equipment that
withstand extreme temperatures, operating voltage and humidity
fluctuation, vibration and shock commonly experienced in severe
outdoor environments.
Plug & Play
This Industrial media converter is designed for the demanding
industrial environments at businesses in need of instant
connectivity with no setup or configure required, truly plug and
play.
IEC-1800 Page
2
Features
Complies with IEC 61850-3 EMC and Environment requirement,
and IEEE 1613 standard for substation and power automation
Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment
Supports Multimode SC fibre up to 2 kilometres
DIP switch configuration for "Link-Fault-Pass-Through," link
down alarm, speed, duplex mode
128K bits buffer memory
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-
MDI/MDIX
Full wire-speed forwarding rate
Alarms for power and port link failure by relay output
-40°C to 75°C (-40°F to 167°F) operating temperature range
IP30 aluminium case
Supports DIN-rail mounting installation
Package Contents
IEC-1800
Quick Installation Guide
IEC-1800 Page
3
LED Status
LED
Status
Description
PW 1,2,3
Steady Power
On
Off Power
Off
FAULT
Steady
Redundant Power or Ports are failed
Off
Redundant Power or Ports are normal
LNK/ACT
Steady
Network connection is established
Flashing
Transmitting or Receiving data
Off
No connection occurred
FDX/COL
Steady Full
duplex
mode
Flashing Collision
occurred
Off Half
duplex
mode
100 (Mbps)
Steady
Connection at 100Mbps speed
Off
Connection at 10Mbps speed
LFP
Steady LFPT
is
enabled
Off
LFPT is disabled
LFPT
: Link Forward Pass Through
